Canon A40 trouble

[Robert Hemus]

On Sun, 2005-06-05 at 18:43, Rick Sivernell wrote:
> On Sun, 05 Jun 2005 00:06:34 -0700
> Robert Hemus <bobhemus at sisqtel.net> wrote:
> 
> > Kind scholars,
> > I'm in a pickle, again.  My camera had been working in LibraNet 2.8.1
> > and SuSE 9.0 like a champ.  Yesterday I tried to download some pix in
> > both distros, but couldn't get no satisfaction!!  
> > In LN I've been using gtkam 'cause it lists my camera.  When I open
> > gtkam with my camera hooked up and on, I get a little window that says,
> > in the top bar, "Bad paramaters" with the message, "Could not list
> > folders in "/". There is a button that says "more", click on it and it
> > says, "An error occurred in the io-library ('Could not claim the USB
> > device'): Could not claim interface 0 (Device or resource busy). Make
> > sure no other program or kernel module (e.g. dc2xx or stv680) is using
> > the device and you have read/write access to the device."
> > 
> > What am I to do??
> > Thanks much in advance.
> > Bob
> > 
> >  
> > 

> Bob
> 
>   I looked into the dmesg and found where it used by the usb port. Then mounted the
> camera as a harddisk. I think some others will say the same. I also use Suse 9.2.
> 
> cheers
Rick, I dmesg | fgrep and got this;

root at libranet:~# dmesg | fgrep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: new USB bus registered, assigned bus number 1
host/usb-uhci.c: $Revision: 1.275 $ time 20:17:46 Aug  3 2003
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 11
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
host/usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
host/usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
host/usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
input0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb2:2.0
usb.c: USB device 2 (vend/prod 0x3f0/0x3304) is not claimed by any
active driver.
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
vid 0x03F0 pid 0x3304
usbdevfs: remount parameter error
Is my problem in theis line?  usbdevfs: remount parameter error?
Oh, by the way this is LN 2.8.1
Bob