Font Scaling Question

[Robert E. Raymond]

Hi all,

I have 2 computers, both Athlon XP, both Radeon, both 17" Trinitron 
monitors (Sony G200 and Dell D1025TM), with identical X Configs except 
that one is set for a higher refresh rate, sync, etc.- the main computer 
is Radeon 8500 with 1600x1200 at 75hz, the 2nd is Radeon LE with 
1600x1200 at 60hz.

And I have virtually identical Gentoo installs on both- the 2nd was set 
up yesterday by copying the contents of the 1st hard disk to it via NFS.

Yet fonts in these basically identical setups are totally different 
size-wise.

The main system has 10-pt. defaults, anti-aliasing enabled.  So those 
settings got copied over as well, but on the 2nd system 10-pt. is almost 
double the size that it is on the 1st system.

Attached is the XF86Config from machine 2.  Any ideas on what I might 
try to get the 2nd machine displaying fonts correctly?
-------------- next part --------------
Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	#Screen	    1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	#Option	       "Xinerama"  "true"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "glx"
	Load  "dri"
	Load  "dbe"
	Load  "record"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "Buttons" "6"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync    30 - 85
	VertRefresh  50-120
EndSection

#Section "Monitor"
#	Identifier   "Monitor1"
#	VendorName   "Dell"
#	ModelName    "D1025TM"
#	HorizSync    30 - 85.0
#	VertRefresh  65 
#EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "ForcePCIMode"       	# [<bool>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        Option     "AGPMode"            	"4"
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "PanelOff"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "MonitorLayout"      	# [<str>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "OverlayOnCRTC2"     	# [<bool>]
        #Option     "CloneMode"          	# [<str>]
        #Option     "CloneHSync"         	# [<str>]
        #Option     "CloneVRefresh"      	# [<str>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon LE]"
	BusID       "PCI:1:0:0"
	Screen	    0 
EndSection

#Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "Dac8Bit"                   # [<bool>]
        #Option     "ForcePCIMode"              # [<bool>]
        #Option     "CPPIOMode"                 # [<bool>]
        #Option     "CPusecTimeout"             # <i>
#        Option     "AGPMode"                    "4"
        #Option     "AGPFastWrite"              # [<bool>]
        #Option     "AGPSize"                   # <i>
        #Option     "RingSize"                  # <i>
        #Option     "BufferSize"                # <i>
        #Option     "EnableDepthMoves"          # [<bool>]
        #Option     "EnablePageFlip"            # [<bool>]
        #Option     "NoBackBuffer"              # [<bool>]
        #Option     "PanelOff"                  # [<bool>]
        #Option     "DDCMode"                   # [<bool>]
        #Option     "MonitorLayout"             # [<str>]
        #Option     "IgnoreEDID"                # [<bool>]
        #Option     "OverlayOnCRTC2"            # [<bool>]
        #Option     "CloneMode"                 # [<str>]
        #Option     "CloneHSync"                # [<str>]
        #Option     "CloneVRefresh"             # [<str>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "VideoKey"                  # <i>
#        Identifier  "Card1"
#        Driver      "radeon"
#        VendorName  "ATI Technologies Inc"
#        BoardName   "Radeon R200 QL [Radeon 8500 LE]"
#        BusID       "PCI:1:0:0"
#	Screen      1
#EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24

	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"
		Depth     4
	EndSubSection
	SubSection "Display"
		Depth     8
	EndSubSection
	SubSection "Display"
		Depth     15
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes	  "1600x1200"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes	  "1600x1200"
	EndSubSection
	SubSection "Display"
		Depth	  32
		Modes	  "1600x1200"
	EndSubSection
EndSection

#Section "Screen"
#	Identifier "Screen1"
#	Device	   "Card1"
#	Monitor	   "Monitor1"
#	DefaultDepth 24
#
#	SubSection "Display"
#		Depth 24
#		Modes	"1600x1200"
#	EndSubSection
#EndSection

Section "DRI"
	Mode 0666
EndSection