Dual+ card reader question.

[Susan Macchia]

Hi Everyone,

I have been using a San Disk dual card reader to read the compact flash that my
camera uses.  I simply mount /dev/sda1 to /mnt/flash.  Now I have another
device which takes MMC.  When I put the MMC in 2nd slot, I am unable to mount
it as /dev/sda1, /dev/sda2 or any other device.  I have searched the SxS site
and found a page on the web regarding these types of readers.  Since I boot
with the device installed, It sees the reader, but only one of them. I am
running RH 8.0, kernel version 2.4.18-27.8.0.

The portion of dmesg which shows the device being seen (but not both):

Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 125440 512-byte hdwr sectors (64 MB)
sda: Write Protect is off
 sda: sda1


Can anyone help me figure out what more I need to do?

TIA

=====
_____________________________
Susan Macchia
mailto:susan at smacchia.net
_____________________________

- Running Linux - because life is too short for reboots...