xine dvd install

[Net Llama!]

On 04/19/03 14:50, Tom Wilson wrote:
> On Friday 18 April 2003 11:18 pm, Net Llama!'s voice rose above the ones 
> in my head and stated:
> 
>> Just start over at step 2 (above), and you'll be fine.
> 
> Many thanks Llama.  I have a new problem now.  
> 
> I started again at step 2 and that was fine.  xine-lib compiled fine.  
> Now when trying to compile xine-ui I get the following error when 
> running ./configure:  
> 
> *** Could not run XINE test program, checking why...
> *** The test program compiled, but did not run. This usually means
> *** that the run-time linker is not finding XINE or finding the wrong
> *** version of XINE. If it is not finding XINE, you'll need to set your
> *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to 
> point
> *** to the installed location  Also, make sure you have run ldconfig if 
> that
> *** is required on your system
> ***
> *** If you have an old version installed, it is best to remove it, 
> although
> *** you may also be able to get things to work by modifying 
> LD_LIBRARY_PATH
> ***
> configure: error: *** You should install xine-lib first ***
> 
> Well, I did forget to run /sbin/ldconfig after make install for 
> xine-lib, but I went back and did it.  Also I did install xine-lib 
> first.  Any ideas?

this could be a few different problems.  first, which distro is this? 
some distros came with xine already, and it badly conflicts with 
attempts to build newer versions.

i'm pretty sure that you can disable runing an xine test program when 
building xine-gui.  run './configure --help' and check all the options, 
this might give you a workaround, if you're certain that you've built & 
properly installed all the prerequisites.

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman                       	       netllama at linux-sxs.org
Linux Step-by-step & TyGeMo: 		    http://netllama.ipfox.com

   2:55pm  up 41 days, 14:22,  3 users,  load average: 0.13, 0.15, 0.09