xine dvd install

[Tom Wilson]

On Friday 18 April 2003 11:18 pm, Net Llama!'s voice rose above the ones 
in my head and stated:

> Just start over at step 2 (above), and you'll be fine.

Many thanks Llama.  I have a new problem now.  

I started again at step 2 and that was fine.  xine-lib compiled fine.  
Now when trying to compile xine-ui I get the following error when 
running ./configure:  

*** Could not run XINE test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding XINE or finding the wrong
*** version of XINE. If it is not finding XINE, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to 
point
*** to the installed location  Also, make sure you have run ldconfig if 
that
*** is required on your system
***
*** If you have an old version installed, it is best to remove it, 
although
*** you may also be able to get things to work by modifying 
LD_LIBRARY_PATH
***
configure: error: *** You should install xine-lib first ***

Well, I did forget to run /sbin/ldconfig after make install for 
xine-lib, but I went back and did it.  Also I did install xine-lib 
first.  Any ideas?

Thanks again.

--
Tom Wilson