NIC problem

[Lonni J Friedman]

On Fri, Sep 26, 2008 at 5:30 PM, Collins Richey <crichey at gmail.com> wrote:
> Here's the background. We run a lot of RHEL4 desktops with two extra
> NICs - one for a Vmplayer Win/XP image, and one for an extra private
> network to connect to test equipment. Most of the existing cards we
> have are 10/100, but we've gotten some newer cards that are
> 10/100/1000 since our newer Cisco switches have gigabit capability.
>
> Using the older cards (identical ones), there is never a problem with
> Ethn ordering. The card in the slot nearest the NIC connector on the
> MB (used for the Linux host) is always ETH1 and the other card is
> always ETH2. Now with the gigabit cards it's a crapshoot to determine
> which card will be detected as ETH1/2. The order varies with each
> reboot!
>
> Anyone have a clue about the cause and/or a workaround for this?
>
> In case that matters, the boxes are mostly HP 5750 towers.

RHEL lets you specify which interface gets which NIC with the HWADDR
variable in /etc/sysconfig/network-scripts/ifcfg-ethX



-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman                                    netllama at gmail.com
LlamaLand                       https://netllama.linux-sxs.org