r8169 PXE boot problems

[Steve Jardine]

On Mon,  7 Apr 2008 02:32:43 +0000 (UTC)
Steve Jardine <sjardine at acm.org> wrote:

> BTW, the Gigabyte MB is what I am using. To get it to work with PXE you have to configure it separately in the BIOS. It is the "Bootrom" selection. Poor choice of words I tell you. PXE is accurate. What is bootrom? PXE? Bootp? *hurmph*
> 
>    For the Gb MB use the r8169s driver code if anyone is interested.
> 
>    Steve
> 
> On Fri, 4 Apr 2008 20:31:43 -0700
> "Lonni J Friedman" <netllama at gmail.com> wrote:
> 
> > On Fri, Apr 4, 2008 at 8:21 PM, David A. Bandel <david.bandel at gmail.com> wrote:
> > > Folks,
> > >
> > >  I have 18 PXE clients.  16 of them (with various ethernet cards) boot
> > >  from a central server just fine.  Two have the Realtek 8169 cards (not
> > >  my choice, built into the motherboard) that won't boot.  They start to
> > >  boot, then after the kernel takes over they go eth0 down and stop.
> > >
> > >  Google suggests I'm not the only one with this problem, but I didn't
> > >  find a clear solution.
> > >
> > >  I'm open to suggestions for how I might get past this snag.
> > 
> > Its most likely a bug in the PXE ROM.  The only thing you can do is
> > verify that you're using the latest SBIOS.  Beyond that, you're out of
> > luck.
> > 
> > -- 
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > L. Friedman netllama at gmail.com
> > LlamaLand https://netllama.linux-sxs.org
> > _______________________________________________
> > Linux-users mailing list ( Linux-users at linux-sxs.org )
> > Unsub/Password/Etc: 
> > http://linux-sxs.org/mailman/listinfo/linux-users
> > 
> > Need to chat further on this subject? Check out #linux-users on irc.linux-sxs.org !
> > 
> _______________________________________________
> Linux-users mailing list ( Linux-users at linux-sxs.org )
> Unsub/Password/Etc: 
> http://linux-sxs.org/mailman/listinfo/linux-users
> 
> Need to chat further on this subject? Check out #linux-users on irc.linux-sxs.org !
>