network card not detected at boot

Vu Pham vu
Mon Oct 16 12:05:16 PDT 2006


On Mon, 2006-10-16 at 10:53 -0500, Michael Hipp wrote:
> Vu Pham wrote:
> > MY worksstation Suse 10.1 x86-64 has two network cards : 
> > -  eth0 device: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet
> > Controller
> > and  eth1 device: nVidia Corporation CK804 Ethernet Controller (rev a3)
> > 
> > Both of them are configured to start automatically at boot.
> > 
> > Right after boot, only eth0 is detected an configured. To make eth1
> > works, I have to start yast to detect the network devices again, then
> > stop and start /etc/init.d/network.
> > 
> > Is it a problem with Suse or the ethernet device or my settings ?
> 
> What do you have in /etc/iftab and /etc/network/interfaces?
> 

Mike,

There is no iftab, and the interfaces are ( in another directory )
ef:/etc/sysconfig/network # ls -l
total 88
-rw-r--r-- 1 root root  8956 2006-10-02 14:34 config
-rw-r--r-- 1 root root  6705 2006-10-02 15:12 dhcp
-rw-r--r-- 1 root root   260 2006-10-02 15:12
ifcfg-eth-id-00:15:f2:da:ee:77
-rw-r--r-- 1 root root   264 2006-10-02 15:12
ifcfg-eth-id-00:15:f2:da:fd:09
-rw-r--r-- 1 root root   141 2006-05-02 06:13 ifcfg-lo
-rw-r--r-- 1 root root 27470 2006-05-02 06:13 ifcfg.template
drwxr-xr-x 2 root root  4096 2006-06-04 12:37 if-down.d
-rw-r--r-- 1 root root   239 2006-05-02 06:13 ifroute-lo
drwxr-xr-x 2 root root  4096 2006-06-04 10:49 ifservices.template
drwxr-xr-x 2 root root  4096 2006-06-04 12:37 if-up.d
drwx------ 2 root root  4096 2006-04-22 21:07 providers
-rw-r--r-- 1 root root    27 2006-09-27 03:48 routes
drwxr-xr-x 2 root root  4096 2006-06-04 12:37 scripts


The two ifcfg-eth-xxxx are ifcfg-eth0 and ifcfg-eth1.

Vu




More information about the Linux-users mailing list