Lousy Network Performance

[GH Snijders]

Kurt Wall <kwall <at> kurtwerks.com> writes:
 
> On Tue, Jun 28, 2005 at 08:41:18AM -0500, Net Llama! took 0 lines to write:
> > What do you get from miitool eth0 and eth1?

[...]
 
> $ mii-tool eth0 eth1
> eth0: negotiated 100baseTx-FD, link ok

> eth1: negotiated 100baseTx-FD, link ok
 
Maybe try Half duplex instead of Full duplex?

I know, ethernet errors (collions) should be reported by ifconfig, but FD seems
only to function well when connected to a switch.

Note: since you're on crossover, make sure both NICs are setup with the same
speed/duplex settings...


mvg,
   Guus