IDE messages I'm not seeing in syslog

[Net Llama!]

The drive is so broken that it can't write to disk, thus, syslog isn't 
recording anything.

On 12/17/2005 07:59 PM, Matthew Carpenter wrote:
> hda: dma_intr: status=0xd0 { Busy }
> 
> ide: failed opcode was: unknown
> hda: DMA disabled
> hda: set_drive_speed_status: status=0xd0 { Busy }
> ide: failed opcode was 100
> ide0: reset: success
> 
> 
> 
> I can see these through dmesg, but not in syslog.
> This is the default Kubuntu syslog config, so I would imagine I should be able 
> to see it in one of the logs... but not.
> 
> -------------
> root at gandalf:~ # grep hda /var/log/*
> /var/log/dmesg:    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, 
> hdb:pio
> /var/log/dmesg:hda: WDC WD1200JB-00DUA3, ATA DISK drive
> /var/log/dmesg:hda: max request size: 1024KiB
> /var/log/dmesg:hda: 234441648 sectors (120034 MB) w/8192KiB Cache, 
> CHS=16383/255/63, UDMA(100)
> /var/log/dmesg:hda: cache flushes supported
> /var/log/dmesg:hda: dma_intr: status=0x58 { DriveReady SeekComplete 
> DataRequest }
> /var/log/dmesg:hda: set_drive_speed_status: status=0x58 { DriveReady 
> SeekComplete DataRequest }
> /var/log/dmesg:EXT3 FS on hda6, internal journal
> /var/log/dmesg:ReiserFS: hda5: found reiserfs format "3.6" with standard 
> journal
> /var/log/dmesg:ReiserFS: hda5: using ordered data mode
> /var/log/dmesg:ReiserFS: hda5: journal params: device hda5, size 8192, journal 
> first block 18, max trans len 1024, max batch 900, max commit age 30, max 
> trans age 30
> /var/log/dmesg:ReiserFS: hda5: checking transaction log (hda5)
> /var/log/dmesg:ReiserFS: hda5: Using r5 hash to sort names

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman                       	       netllama at linux-sxs.org
LlamaLand		 		http://netllama.linux-sxs.org

  20:10:01 up 6 days,  6:20,  1 user,  load average: 0.29, 0.26, 0.27