Help! Unable to get SBLive to work on RH9/Fedora

[Tom Jandl]

Try booting your machine with a recent version of Knoppix. If sound
works OK then checking out the modules and settings used by Knoppix
should give you some good hints.

Tom

On Mon, 2004-03-08 at 09:25, Susan Macchia wrote:
> Hi all,
> 
> I have a relatively new DELL with hyperthreading.  I installed RH9.0 and just
> recently switched to Fedora Core 1.  In either case I cannot seem to get my
> SBLive card to work.  Niether distro recognizes that there is a sound device.
> Under WinXP (what it came with), the card worked fine.
> 
> When I try and install the module, this is what I get:
> 
> [root at gondor susan]# /sbin/modprobe emu10k1
> /lib/modules/2.4.22-1.2115.nptlsmp/kernel/drivers/sound/emu10k1/emu10k1.o:
> init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters, including
> invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.22-1.2115.nptlsmp/kernel/drivers/sound/emu10k1/emu10k1.o:
> insmod
> /lib/modules/2.4.22-1.2115.nptlsmp/kernel/drivers/sound/emu10k1/emu10k1.o
> failed
> /lib/modules/2.4.22-1.2115.nptlsmp/kernel/drivers/sound/emu10k1/emu10k1.o:
> nsmod emu10k1 failed
> 
> I have no idea where to go from here so any help is greatly appreciated.  I
> googled, but everything I found discusses how to install the modules, etc.  I
> don't think that this is the issue.  And I have no idea how to fiddle with the
> IRQ settings if this is indeed the problem (sigh).
> 
> As I said *any* help is much appreciated,
> 
> Sue
> 
> =====
> _____________________________
> Susan Macchia
> mailto:susan at smacchia.net
> _____________________________