More Compile issues

[Jim Bonnet]

1) Are you sure you coppied the right System.map into /boot? You are 
still getting errors about that

2) char major 81 is for /dev/video and a couple other things.. check 
devices.txt in the Doc's.. it has nothing to do with anything other than 
an alias in modules.conf.. assuming you have no video devices.

3) What happens if you modprobe your SCSI host adapter from the command 
line. What are the errors?

Regards-
Jim

Bonez wrote:
> Lonni:
> 
> Per your request for clarity I found some information that might help you and 
> the others help me, from /var/log/messages: 
> 
> Jan  2 17:11:57 scott modprobe: modprobe: Can't locate module char-major-81
> Jan  2 17:20:03 scott syslogd 1.4-0: restart.
> Jan  2 17:20:05 scott kernel: klogd 1.4-0, log source = /proc/kmsg started.
> Jan  2 17:20:05 scott kernel: Inspecting /boot/System.map
> Jan  2 17:20:06 scott kernel: Symbol table has incorrect version number.
> Jan  2 17:20:06 scott kernel: Cannot find map file.
> Jan  2 17:20:06 scott kernel: Loaded 7 symbols from 1 module.
> Jan  2 17:20:06 scott kernel: Linux version 2.4.20-W4L020103 
> (scott at scott.sanchiro.sys) (gcc version 2.95.2 19991024 (release)) #1 Thu Jan 
> 2 16:23:29 MST 2003
> 
> Here's info on my sound card: 
> 
> Jan  2 17:20:06 scott kernel: isapnp: Scanning for PnP cards...
> Jan  2 17:20:06 scott kernel: isapnp: SB audio device quirk - increasing port 
> range
> Jan  2 17:20:06 scott kernel: isapnp: Card 'Creative ViBRA16C PnP'
> Jan  2 17:20:06 scott kernel: isapnp: 1 Plug & Play card detected total
> 
> XFS enabled: 
> 
> Jan  2 17:20:06 scott kernel: SGI XFS snapshot 2.4.20-2002-11-29_01:21_UTC 
> with
> ACLs, quota, no debug enabled
> 
> My netcard detected: 
> 
> Jan  2 17:20:06 scott kernel: Linux Tulip driver version 0.9.15-pre12 (Aug 9, 
> 2002)
> Jan  2 17:20:06 scott kernel: PCI: Found IRQ 9 for device 00:0c.0
> Jan  2 17:20:06 scott kernel: tulip0: no phy info, aborting mtable build
> Jan  2 17:20:06 scott kernel: eth0: Macronix 98715 PMAC rev 32 at 0x6800, 
> 00:80:AD:3B:FF:43, IRQ 9.
> 
> This is where I think my HP card is failing to initialize for the SCSI 
> adapter to ScanJet 4c scanner: 
> 
> Jan  2 17:20:06 scott kernel: kmod: failed to exec /sbin/modprobe -s -k 
> scsi_hostadapter, errno = 2
> Jan  2 17:20:06 scott kernel: kmod: failed to exec /sbin/modprobe -s -k 
> scsi_hostadapter, errno = 2
> 
> What does this mean: 
> 
> Jan  2 17:20:32 scott modprobe: modprobe: Can't locate module char-major-81   
> 
> For what it's worth, maybe these can shed some light on my 2.4.20 run 
> difficulties. 
> 
> Scott  
> _______________________________________________
> Linux-users mailing list
> Linux-users at linux-sxs.org
> Unsubscribe/Suspend/Etc -> http://www.linux-sxs.org/mailman/listinfo/linux-users