USB and SCSI (again)

[Alan Jackson]

Okay, I've got a little CF card reader attached to a USB port.

When I attach it, /var/log/messages says :

Dec 26 21:48:33 earthman kernel: hub.c: USB new device connect on bus1/1, assigned device number 20

and in dmesg I see :

hub.c: USB new device connect on bus1/1, assigned device number 20
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 20

$ /sbin/lsmod | grep -i usb
usb-storage            41232   0
usb-uhci               21088   0 (unused)
usbcore                46272   1 [usb-storage usb-uhci]
scsi_mod               82400   4 [usb-storage sd_mod sr_mod ide-scsi]

$ /sbin/lsmod | grep -i scsi
ide-scsi                7056   0
scsi_mod               82400   4 [usb-storage sd_mod sr_mod ide-scsi]

and # cat /proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05e3 ProdID=0700 Rev= 1.13
S:  Product=USB Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 96mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms

but, 
# cat /proc/scsi/scsi
Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATAPI    Model: CD-R/RW 12X8X32  Rev: 9.AB
  Type:   CD-ROM                           ANSI SCSI revision: 02

No USB filesystem. And when I try to mount to /dev/sda1, I get 
mount: /dev/sda1: unknown device

I don't see the problem, although I suspect something with my SCSI setup.
The only scsi stuff I normally do is my CDRW.

Any ideas?


-- 
-----------------------------------------------------------------------
| Alan K. Jackson            | To see a World in a Grain of Sand      |
| alan at ajackson.org          | And a Heaven in a Wild Flower,         |
| www.ajackson.org           | Hold Infinity in the palm of your hand |
| Houston, Texas             | And Eternity in an hour. - Blake       |
-----------------------------------------------------------------------