Help

[Richard Sivernell]

List

 Need some real help here. Lost my gateway router
drive last weeked and have been working to replace it.
I have installed eServer 3.1.1 on a one gig hard
drive, wait a sec. It has no gui except xdm & xterm
and opera to get to the net. My inside network can not
get to the outside world. 

What I have follows:
4 machines that can talk to each other in an intra net
using 192.168.1.10,20,50,60, 1 is set as a router on
router machine. All are same as when all worked, no
changes.

New router machine:
[root at Sivernell root]# ifconfig
eth0      Link encap:Ethernet  HWaddr
00:48:54:55:94:7C inet addr:192.168.1.1
Bcast:192.168.1.255  Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:4585 errors:0 dropped:0 overruns:0 frame:0
TX packets:450 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 

eth1      Link encap:Ethernet  HWaddr
00:48:54:55:8E:E4  
inet addr:4.60.245.151  Bcast:4.60.255.255 
Mask:255.255.240.0 UP BROADCAST RUNNING MULTICAST 
MTU:1500  Metric:1 RX packets:4751 errors:0 dropped:0
overruns:0 frame:0 TX packets:5632 errors:0 dropped:0
overruns:0 carrier:0 collisions:10 

lo        Link encap:Local Loopback  
inet addr:127.0.0.1  Mask:255.0.0.0
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:46 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 

[root at Sivernell root]# 

[root at Sivernell root]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U      0      0 0
eth0 
4.60.240.0  0.0.0.0 255.255.240.0 U      0      0 0
eth1
127.0.0.0   0.0.0.0 255.0.0.0     U      0      0 0 lo
0.0.0.0     4.60.240.1 0.0.0.0    UG     0      0 0
eth1
0.0.0.0     192.168.1.1 0.0.0.0   UG     1      0 0
eth0
[root at Sivernell root]# 

4.60.240.1 -> 4.60.240.151 are dhcp from ISP eth1
192.168.1.1 are static                       eth0

  I also found a iptables script that Doug had asked
all to view for his use for firewall. I have moded it
for my use and installed as such >> ./iptables_script

  I assume I have not gotten something right or messed
up somewhere. Any help appreciated here

   I am using Yahoomail till I can get my system back
on line, please forgive me, please

cheers

Rick Sivernell
res005ru at gte.net

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com