Question PCMCIA

[Richard R. Sivernell]

On Wed, 5 Jun 2002 10:52:28 -0400 (EDT)
Net Llama! <netllama at linux-sxs.org> wrote:

> Make sure that the appropriate module(s) for the PCMCIA NIC that you're
> using is loaded.  See http://pcmcia-cs.sf.net for the correct module(s).
> Once you do that, you should be able to bring up the interface.
> 
> On Tue, 4 Jun 2002, Richard R. Sivernell wrote:
> > List
> >
> >     Damn, I just installed peanut linux on a older laptop, kde2.1 is
> > up and running, along with sound. The last step is make the network
> > talk. Used the setup program from peanut and then set hosts &
> > some other files with the proper address required. I can ping localhost
> > ok, but no others, not surprising that it does not talk to the pcmcia card.
> > I have several cards to use. 1) link sys 2) dlink 3) xircom creditcard.
> > but no network connect. This is my 1st time with pcmcia. What else do
> > I need to setup.
> > I have modified thefollowing files to add static address & domain
> > 1. hosts setup
> > 2. /etc/pcmcia/config
> > 3. /etc/rc./rc.inet1
> > 4. /etc/pcmcia/network.opts
> >
> > cheers
> >
> 
> -- 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Lonni J Friedman				netllama at linux-sxs.org
> Linux Step-by-step & TyGeMo		     http://netllama.ipfox.com
> 
> _______________________________________________
> Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users
> Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Lonnie

Thanks

-- 
Rick Sivernell
Dallas, Texas  75287
972 306-2296
res005ru at gte.net
Caldera Open Linux eWorkStation 3.1.1
Registered Linux User

   .~.
  / v \
 /( _ )\
   ^ ^
In Linux we trust!