RH 7.3 install

[Net Llama!]

Errrr...i don't think so.  At least that's not how i do it with my digital
camera.  Then again, i use photopc, which has a switch to set the serial
device & port speed.

On Tue, 4 Jun 2002, Ronnie Gauthier wrote:
> So I should make a file /etc/rc.d/rc.serial with the line,
> /bin/setserial /dev/ttyS1 spd_vhi
>
> On Tuesday 04 June 2002 04:57 pm, Net Llama! wrote:
> > On Tue, 4 Jun 2002, Ronnie Gauthier wrote:
> > > side note.
> > > I have a Kodak DC5000 digital camera. After trial and error I found that
> > > Gphoto supports it as the Kodak 240 through the serial cable. Works great
> > > but a bit slow compared to the Kodak software on my NT box. I have not
> > > gotten my
> >
> > Are you using serial in NT, or USB/IEEE1324?  If its serial in NT, make
> > sure that you're setting the speed to 115200 in linux.
> >
> > > Sony vid-cam TRV525 working yet. Guess I'll need to get a 1394 card. Cant
> > > get anything through the serial connect. I also  have a connectix "quick
> > > clip"
> >
> > The serial port doesn't have enough bandwidth for the vidcam.
> >
> > > parallel that I just cant get working under linux?!?
> >
> > sorry, no clue about that.
>
>
> _______________________________________________
> Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users
> Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
>

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lonni J Friedman				netllama at linux-sxs.org
Linux Step-by-step & TyGeMo		     http://netllama.ipfox.com