gcombust and cdrecord

[Net Llama!]

On Tue, 21 May 2002, Harry G wrote:
> I have tried using gcombust, and it looks good, but I have been having
> a lot of trouble with burning with gcombust or xcdroast.
>
> In teh cdrecord output window of gcombust, I get the following error:
>
> /usr/bin/cdrecord: Input/output error. read track info: scsi sendcmd:
> no error
> CDB:  52 01 00 00 00 FF 00 00 1C 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 240s
> /usr/bin/cdrecord: fifo had 64 puts and 0 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill
> was 100%.
>
>
> Not knowing what the above, means, I feel that since neither frontend
> works correctly, my problem must be with cdrecord.

No, its your hardware.  Sense key errors indicate a hardware failure, in
this case, either the CD drive, cable or controller.  Have you looked in
your messages log lately?

> Also, I opened Package Manager to see the list of files used by
> cdrecord, and when clicking on the File List tab, I get a pop up window
> titled "File Attribute Differences" and lists .M..... /usr/bin/cdrecord
> in the window.  (Enlarging the window doesn't expand the .M..... info).

Because that's all it should show.  See the rpm man page for the meaning
of each of those fields, however in this case, the permissions & file type
(mode) have been changed from the original.  This isn't your problem
however.

> I did a cdrecord -scanbus, and it sees both my scsi emulated drives on
> scsibus0.
> I am using cdrecord version 1.11a05 by the way.
>
> What does anyone see wrong here?  Is the a conf file that I need to
> check?

Unfortunately, no.

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lonni J Friedman				netllama at linux-sxs.org
Linux Step-by-step & TyGeMo		     http://netllama.ipfox.com