gcombust and cdrecord

[Harry G]

I have tried using gcombust, and it looks good, but I have been having 
a lot of trouble with burning with gcombust or xcdroast.

In teh cdrecord output window of gcombust, I get the following error:

/usr/bin/cdrecord: Input/output error. read track info: scsi sendcmd: 
no error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 240s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill 
was 100%.


Not knowing what the above, means, I feel that since neither frontend 
works correctly, my problem must be with cdrecord.

Also, I opened Package Manager to see the list of files used by 
cdrecord, and when clicking on the File List tab, I get a pop up window 
titled "File Attribute Differences" and lists .M..... /usr/bin/cdrecord 
in the window.  (Enlarging the window doesn't expand the .M..... info).

I did a cdrecord -scanbus, and it sees both my scsi emulated drives on 
scsibus0.
I am using cdrecord version 1.11a05 by the way.  

What does anyone see wrong here?  Is the a conf file that I need to 
check?


TIA

Harry G