Creative Muvo mp3 player #2

[Harry Giles]

Net Llama! wrote:

> On 12/27/2004 01:42 PM, Harry Giles wrote:
>
>> Net Llama! wrote:
>>
>>> On 12/27/2004 08:39 AM, Harry Giles wrote:
>>>
>>>> Jerry McBride wrote:
>>>>
>>>>> On Sunday 26 December 2004 06:59 pm, Harry Giles wrote:
>>>>>
>>>>>> As per this lists recommendations, got the above for my 
>>>>>> daughter.  Any
>>>>>> ideas how to access it on Linux?  (running Suse 9.2)
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> Load usb drivers, plug in the player, view var/log/messages to 
>>>>> determine the correct device to mount, then mount it thus:
>>>>>
>>>>> mount -t vfat /dev/sda1 /mnt/muvo
>>>>>
>>>>> Once mounted, read write to your desire. Be CERTAIN to umount it 
>>>>> before unplugging it...
>>>>>
>>>>
>>>>
>>>> When I do, I get:
>>>>
>>>>
>>>> Dec 27 11:34:35 linux kernel: usb 6-3: new high speed USB device 
>>>> using address 3
>>>> Dec 27 11:34:36 linux kernel: usb 6-3: device not accepting address 
>>>> 3, error -71
>>>> Dec 27 11:34:36 linux kernel: usb 6-3: new high speed USB device 
>>>> using address 4
>>>> Dec 27 11:34:36 linux kernel: usb 6-3: device not accepting address 
>>>> 4, error -71
>>>>
>>>>
>>>> What is the error 71?
>>>
>>>
>>>
>>>
>>> Which kernel version are you using?
>>>
>>>
>>
>> Suse's 2.6.8-24  (Suse 9.2)
>
>
> hrmmm.  do you have more than 1 USB port to try out?  Googling on that 
> error seems to suggest some kind of funky resource issue.
>
> Beyond, i really don't have any ideas, sorry.
>
>
OK.  Tried on my laptop.  /var/log/messages tells me:

Dec 27 17:33:31 linux kernel: usb 4-5: new high speed USB device using 
address 3
Dec 27 17:33:32 linux kernel: usb 4-5: Product: MuVo Slim
Dec 27 17:33:32 linux kernel: usb 4-5: Manufacturer: CREATIVE
Dec 27 17:33:32 linux kernel: usb 4-5: SerialNumber: 00000104E80A4111
Dec 27 17:33:39 linux kernel: Initializing USB Mass Storage driver...
Dec 27 17:33:39 linux kernel: scsi0 : SCSI emulation for USB Mass 
Storage devices
Dec 27 17:33:39 linux kernel:   Vendor: CREATIVE  Model: MuVo 
Slim         Rev: 0001
Dec 27 17:33:39 linux kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 02
Dec 27 17:33:39 linux kernel: SCSI device sda: 499712 512-byte hdwr 
sectors (256 MB)
Dec 27 17:33:39 linux kernel: sda: Write Protect is off
Dec 27 17:33:39 linux kernel: sda: Mode Sense: 03 00 00 00
Dec 27 17:33:39 linux kernel: sda: assuming drive cache: write through
Dec 27 17:33:39 linux kernel:  sda: sda1
Dec 27 17:33:39 linux kernel: Attached scsi removable disk sda at scsi0, 
channel 0, id 0, lun 0
Dec 27 17:33:39 linux kernel: Attached scsi generic sg0 at scsi0, 
channel 0, id 0, lun 0,  type 0
Dec 27 17:33:39 linux kernel: USB Mass Storage device found at 3
Dec 27 17:33:39 linux kernel: usbcore: registered new driver usb-storage
Dec 27 17:33:39 linux kernel: USB Mass Storage support registered.
Dec 27 17:33:50 linux /etc/dev.d/block/50-hwscan.dev[7906]: new block 
device /block/sda/sda1
Dec 27 17:33:50 linux /etc/dev.d/block/50-hwscan.dev[7907]: new block 
device /block/sda
Dec 27 17:33:50 linux /etc/dev.d/block/51-subfs.dev[7922]: mount block 
device /block/sda/sda1
Dec 27 17:33:50 linux /etc/dev.d/block/51-subfs.dev[7928]: mount block 
device /block/sda


So I guess I need to do a

mount -t fat /dev/sda1 /mnt/muvo

Do I have to create the /mnt/muvo file first?  Otherwords, how do I 
create a mount point?

Harry G