usb support in kernel 2.4.28

[Man-wai Chang]

this is what I got when I plugged in the USB Drive Pro.

> hrmm, it looks sane to me.  are you sure that you're booting into this 
> kernel?  what does dmesg look like?



-- 
   .~.    Might, Courage, Vision. http://toylet.homeip.net
  / v \   Linux 2.4.28
/( _ )\  7:38pm up 4 days 3:26
   ^ ^    load average: 0.99 0.96 0.92
-------------- next part --------------
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 00:07.2-1 address 2
usb.c: kusbd: /sbin/hotplug remove 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:07.2-1, assigned address 3
usb.c: kmalloc IF c23d7640, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 3 default language ID 0x409
Manufacturer:         
Product: USB DISK Pro    
SerialNumber: 07471B0501D9
usb.c: unhandled interfaces on device
usb.c: USB device 3 (vend/prod 0xd7d/0x1620) is not claimed by any active driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 2.00
  Vendor:Product      = 0d7d:1620
  MaxPacketSize0      = 64
  NumConfigurations   = 1
  Device version      = 1.00
  Device Class:SubClass:Protocol = 00:00:00
    Per-interface classes
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 0027
  bNumInterfaces      =   01
  bConfigurationValue =   01
  iConfiguration      =   00
  bmAttributes        =   80
  MaxPower            =  200mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   03
    bInterface Class:SubClass:Protocol =   08:06:50
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   81 (in)
      bmAttributes        =   02 (Bulk)
      wMaxPacketSize      = 0040
      bInterval           =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   02 (out)
      bmAttributes        =   02 (Bulk)
      wMaxPacketSize      = 0040
      bInterval           =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   83 (in)
      bmAttributes        =   03 (Interrupt)
      wMaxPacketSize      = 0040
      bInterval           =   01
usb.c: kusbd: /sbin/hotplug add 3
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
[IPTABLES DROP] : IN=eth1 OUT= MAC=00:a0:c9:57:29:41:00:00:77:95:dc:b8:08:00 SRC=24.43.133.68 DST=61.10.51.69 LEN=48 TOS=0x00 PREC=0x00 TTL=104 ID=28900 DF PROTO=TCP SPT=49078 DPT=9696 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B401010402)