<div dir="ltr">Perc 3D/i<div><br></div><div><div>Boot partition is on channel 0</div><div>Data on channel 1</div><div><br></div><div>Data partition died. Boot working fine. Container rebuilt.</div><div>Controller sees both containers.</div><div><br></div><div>Boot detects drive 0080 and drive 0081</div><div><br></div><div>cannot for the life of me can I remember what to put for the bus and target in mkdev<br></div><div><br></div><div>The boot disk is </div><div>type=S ha=0 id=0 lun=0 bus=0</div><div><br></div><div>Any help would be REALLY appreciated. </div><div>If you need any more info let me know.</div><div><br></div><div>Rick Walsh</div><div><br></div><div><br></div></div></div>